The double collision of the husband and wife designer

 

Renovation is always a hassle. The male owner wants to be decorated like this, and the female host wants to be decorated like that. It is always inevitable to dispute. This is especially true for families where both husband and wife are designers. Fortunately, both husband and wife like the American style, which is the biggest consensus.

plan

plan

The overall style is American, just like the appearance of an apartment on the streets of New York, adding a strong warm gray system, herringbone wooden floors and custom-made furniture, and a lot of things are not messy.

plan

plan

The husband and wife both support the battlefield of residence. The female host insists on having a kitchen of the same size as the living room, while the male host wants to have a spacious bathroom that is the same as the bedroom. However, under the limited space, the female host made sacrifices. They abandon the one-room area and increase other uses to make the storage centralized.

plan

Use glass curtains to create a sense of sunshine loft, with plenty of daylight to illuminate the entire open-plan guest and restaurant, plant large green plants outside, and make your own scenery. In the summer evening, the whole family dine and enjoy happiness.

plan

plan

The husband and wife started from the basic project. Almost all the furniture is designed by themselves, please ask the master to customize it.

plan

The couple designer recommends that netizens want to create different styles of feelings. Starting from color is the easiest way to save money. Do n’t be afraid to try it. Always think of it as a white safety sign. It is recommended to start with the earth color system and the single-sided wall. It doesn't matter if you don't like to change it. At the same time, I also remind you not to be too greedy. The number of pings is only about 20 pings. It is best to separate the two rooms and leave some space for preparation. The planning must also be chosen. If you want sufficient sunlight, it is best to increase the window area of ​​the kitchen wall to reduce the storage part .

Editor in charge: GO Jiaju

Related Reading

Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries.  we adopts automatic mixing of raw material, double-screw extruder and delicate three-roller calender equipment in the PVC membrane production. PVC waterproof membrane features dimensional stability and high tensile strength, being a best choice for many civil and industrial projects. PVC waterproof membrane mainly falls into two categories: Homogeneous & Reinforced, each with different thickness specifications. Reinforced PVC waterproof membrane employs a fabric reinforced layer in the middle, it enhances the breaking and tear strength.

PVC on roll

Features:
- Excellent performance in aging resistance, service life of 20 years for exposed use, and 50 years for non-exposed application
- High puncture and rooting resistance, especially suitable for planting roof system
- Easy installation and hot-air welding seam, environment friendly
- High tensile strength and elongation, size stability
- Good plasticity, convenient for detailing and coners installation
- Inherently fire resistant

Performance Characteristics:

Anti-aging ,  high plasticity ,  root system penetration resistance ,  inflaming retarding ,  environmental protection stain resistance ,  high tensile strength ,good elongation , excellent dimensional stability ,  and  less cost.

Executive Standard:

GB18173.1-2012   GB12952-2011

Specification:

Thickness: 1.0-2.0mm Width: 2m

Application:

It' s suitable for industry and construction various roofing waterproofing ,basement ,  reservoirs ,  dams ,  highw ay  tunnels ,  railway tunnel ,  civil  air defense projects ,  grain depot ,  landfill ,  wastewater treatment construction waterproofing etc.
Technical Data:

ASTM Standard   D-4434/D-4434M   ASTM Standard   for PVC Sheet Roofing

No.

Item

Specification

Type II

Type III

Type IV

1

Overall thickness of PVC sheet, min, mm (in.)

1.14 (0.045)

1.14 (0.045)

0.91 (0.036)

2

Thickness over scrim, min. mm (in.)A

0.40 (0.016)

0.40 (0.016)

0.40 (0.016)

3

 

 

Tensile strength at break, min, MPa (psi):

Machine direction

10.3 (1500)

...

...

Cross-machine direction

10.4 (1500)

...

...

4

Breaking strength, min, kN/m (lbf/in.)

...

35 (200)

48 (275)

5

 

 

Elongation at break, min, %

Machine direction

250

15B

25B

Cross-machine direction

220

15B

25B

6

Seam strength, min, % of tensile or breaking strength

75

75

75

7

 

 

 

Retention of properties after heat aging

Tensile strength, min, % of original

90

...

...

Breaking strength, min, % of original

...

90

90

Elongation, min, % of original

90

90

90

8

Tear resistance, min, N (lbf)

45.0 (10.0)

...

...

9

Tearing strength, min, N (lbf)

...

200 (45.0)

400 (90.0)

10

Low temperature bend

pass

pass

pass

11

Accelerated weathering test

 

Cracking (73 magnification)

none

none

none

 

Crazing (73 magnification)

none

none

none

12

Linear dimensional change, max, %

0.1

0.5

0.5

13

Change in weight after immersion in water, max, %

±3.0

±3.0

±3.0

14

Static Puncture Resistance

pass

pass

pass

15

Dynamic Puncture Resistance

passC

passC

passC




PVC Waterproofing Roll Material

Pvc Waterproofing Roll Material,Flexible Pvc Material Waterproof Roll,Pvc Sheet Rolls For Waterproofing,Pvc Waterproof Roll Membrane Material

Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com