The problem of housing inspection has always been a matter of great concern to the owners, but it is also a matter of caution. Today, let the decoration home decoration network Xiaobian to introduce the relevant knowledge of the inspection of the house , I hope to bring you help! Synthetic ice can be used all year round, indoors and outdoors. It is completely free from any restriction of climate, temperature and other natural conditions. It can be installed on all kinds of cement, wood, asphalt and other flat ground. It can be installed quickly. In the process of convenient disassembly and operation, it does not need refrigeration, power consumption, zero emission, pollution-free, and total investment is less. It is only about one fifth of the artificial ice system. It is a large-scale ice sports facility Primary and secondary schools and various sports venues have established a solid foundation. Easy to maintain and recycle after use. Synthetic Ice Rink,Synthetic Ice Panels,Synthetic Ice Sheets,Synthetic Ice Flooring PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com
1. Is there a crack in the wall?
When checking whether the wall surface is flat, it is also necessary to see whether there are cracks on the wall surface (common four major cracks: strength cracks, settlement cracks, temperature cracks, deformation cracks), whether there are wire meshes and steel bars that leak outside. If you find the above wall problems during the inspection, you can finally sign the signature after the developer helps.
2. Is the door and window installation track smooth?
In terms of door and window inspection, the most important thing is to check whether the track of the door and window is smooth. Especially for the parents who open the window, we must pay attention to whether it can be closed. Otherwise there will be wind entering the house, especially in the cold north, so you will be miserable in the winter. If you find these problems when you re-inspect the house, you can directly notify the developer, they will repair it quickly. If you have signed the problem and then look for the developer to deal with these problems, then their efficiency will be significantly slower.
3. Does the entrance door have bumps and paints?
It is necessary to carefully check whether the entrance door has bumps and paints. In a strict sense, the inside, outside and top of the door must be painted. The clearance of the door should not be too big. There is no special sound when the door is opened or closed. The four sides of the door should be close to the door frame. The clearance of one side of the door lock should not be too large. At the same time, don't forget the trial lock, mainly to see if the key is easy to use, and Whether the door lock is sturdy or not. Another important point is that the door is soundproofed and sealed.
4, balcony equipment is not damaged
When accepting the balcony, it is mainly to see if the floor of the balcony is flat or not, and secondly, whether the window equipment of the balcony is intact.
5, whether the water supply is fully equipped
The precautions for checking the water supply are mainly to see if there is water supply to the faucet of each water pipe in the room, and whether it is fully furnished (including the faucet in the pipe well in the corridor).
6. Is the drainage normal?
After the water supply, the remaining problem is the solution of the drainage problem. The location of the acceptance drainage is mainly in the basin, toilet, bathtub, and bathroom, kitchen, balcony floor drain, etc. (should be heard and the surface is free of water). There should be no stagnant water on the qualified ground, because the ground drain is the lowest point, but the height of the post-paved ground is left around the floor drain of the rough house. Try to make the water flow as big and urgent as possible, see the water pressure, and test the drainage speed.
The electrical inspection is first to check whether the amount of water in the electricity card and water card is the same as the quantity purchased;
8, check the flatness of the room
How to check the flatness of the room:
(1) Put a heavy object on the roof with a string, put the wall down to the foot of the wall, and check the inclination from the surrounding.
(2) The visual inspection is roughly flat.
(3) Check the flatness of the wall. Whether the wall and the roof slab are particularly inclined, whether it is bent or waved.
9, check the verticality of the door and window
(1) Whether the latches and door locks of the gates and doors are too long and too tight.
(2) Is the door plug inserted too little? Is the door gap too large (especially the side of the door lock).
(3) Is the door frame close to the door frame? There is no special sound when the door is opened and closed.
(4) There are no water stains under the window sill? If there is any, the window may leak.
(5) There is no gap between the window edge and the concrete interface.
(6) Is the switch window too tight? Can it be properly closed?
(7) Is the window glass intact?
The precautions for the inspection of the house will be introduced here. I hope that the decoration house decoration network can bring convenience and convenience to your life. If you want to know more about the relevant aspects, you can continue to pay attention to our decoration encyclopedia section!