High temperature days need to pay attention to fire safety

As the hot days approach, fire prevention work must be in place

A arbitrarily stacked debris should be properly disposed of

In the early hours of the morning, the dormitory dormitory fire broke out

A number of factories were gathered in the Huguang Towel Factory factory area, and a dormitory on the first floor of the dormitory building on the southernmost side of the plant area caught fire. Yesterday at 6 o'clock in the morning, many employees in the dormitory building were still asleep. The sudden fire was accompanied by heavy smoke and they were awakened.

At 9:00 in the morning, firefighters evacuated from the scene. There were two small rooms in the burning dormitories. The larger one had been burned by a fire. Four walls were blackened and the northern window glass burst in the fire. . After the fire was extinguished, the staff will clean up the scene. The reporter found that there were many plastic barrels in the piles of objects that had been burned. Some of them had been burned, some were baked and melted in high temperatures, and the plastic barrels smelled of alcohol.

“I was still sleeping at 6 o'clock in the morning and suddenly I heard someone calling out of the fire.” A woman living next door to the burning dormitory said that a worker called the police later. The scene learned that the burning dormitory was rented by a factory. The fire caused a middle-aged man's face and hair to be burned, but the injury was not heavy.

Suspected line problems cause trouble, flammable products fuel fire

After receiving an alarm at 6 o'clock in the morning, the fire department dispatched rescue vehicles. The firefighters learned at the scene that the fire may have been caused by a problem in the line of fire in the dormitory. The residual alcohol in the plastic barrel contributed to the fire. Why are there so many plastic buckets filled with alcohol in the staff quarters of the factory? The staff in the dormitory said that in the dormitory where the fire broke out, people lived in the dormitory. It was the factory inside the factory that rented and put things. The reporter found that in this dormitory In addition to stacking a lot of plastic buckets, a lot of debris was piled up in the small room. Fortunately, at the time of the fire, nearby staff promptly called the police, and the firefighters quickly dispose of it. There was no overheating in the small room.

For the flammable materials piled up in the dormitory building, the employees of the factory area expressed concern: “There are so many people in the dormitory building. This is a good time for the fire to burn. If the fire is big, what will happen to the injured person? Putting flammable materials in dormitory rooms is inherently dangerous.

Incident link:

Recently, several fires caused by debris have been piled up. At 5:00 pm on May 30th, after the Xixi Chinese Hospital site was being demolished, a lot of disassembled debris was piled up. When the workers used the spray gun to cut the objects, Mars was splashed into the debris pile, causing fire; At around 8 am on June 1st, an electric car garage next to a residential building at Daxie Mountain near Meiyuan Park burst into flames. Nearly 10 electric cars were burned. The fire was piled up in the garage in addition to the electric car. A large number of waste bins, wooden boards and other debris also contributed to the fire.

Firefighting staff said that smoldering may occur when long-term accumulation of waste wood, paper, etc. occurs. Smoldering is a kind of flame-free slow burning, which will cause the temperature to rise and decompose the combustible gas. Under certain conditions, the smoldering will be converted into flaming combustion, causing fire. Burning materials such as waste wood burn fast, and the fire usually spreads in a short time. Today, some families, especially those in rural and suburban areas, are accustomed to dumping sundries in the yard. For this reason, the police reminds them that some flammable materials must be properly placed, such as waste wood, cartons, etc., cannot be piled up over years to prevent accidents. . The public should promptly clean up the piles of combustible debris and avoid direct sunlight or high-temperature baking of flammable materials in summer.

B line security can not be ignored

"Summer temperatures, high-power electrical appliances such as air conditioners and refrigerators can easily lead to overload and short circuit of the line, which can lead to fire," the firefighter said. It is best for the general public to check the power supply lines and replace aging lines in time. When increasing the number of high-power electrical appliances, it is necessary to support capacity expansion to prevent overload of power supply lines. When conditions are limited, high-power electrical appliances can be used to prevent overloading of lines. .

In addition, the hot weather, the unit, the company's household electricity consumption increased, the electrical line load increased, the old electrical fire hazards can not be ignored, should do a good job in inspection and maintenance and replacement.

C. Cars do a good job in maintenance inspection

Wuxi City Fire Brigade Fire Division Huang Gaogong said that high-temperature days are also a period of high auto-ignition, causing auto-ignition is basically caused by the problem of lines and oil lines, there are a large number of lines under the hood, at night or early morning when the vehicle starts It is important to pay attention to the fire caused by the short circuit caused by water vapor.

In addition, some car owners will go to some not very regular car modification shops to modify the car. The more common ones such as modified headlights, installation of navigation, parking sensor, audio and video, etc., change the original line of the car is also likely to cause short circuit Caused auto-ignition, some car owners heavy machine maintenance, light electrical line maintenance, resulting in short circuit lines, sparks encountered oil or other flammable substances cause fire. Motor vehicles should be checked and maintained, and should not be exposed to sunlight for a long time to avoid “fire” on the roads of motor vehicles.

This article is a reprint of online media. It only represents the author's point of view. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.

High Purity Graphite refers to Graphite Carbon content > 99.99%, widely used in high-grade refractory material and coating of metallurgy industry, military industry, fire engineering pencil lead on material stabilizer, light industry, electrical industry of carbon brush, electrode of battery industry, fertilizer industry catalyst, additive, etc.

Performance: the scales of crystallization is complete, thin and toughness, good physical and chemical performance, good thermal conductivity, temperature tolerance, self-lubrication, conductivity, thermal shock resistance, corrosion resistance and other properties.

Description: high purity Graphite (aka: scaly high thermal conductivity carbon powder) has high strength, good thermal shock resistance, high temperature resistance, oxidation resistance, resistance coefficient, corrosion resistance, and the advantages of easy to precision machining, is the ideal inorganic non-metallic materials. Used for processing and production of electrical heating components and smelting casting mould structure, high purity metal with boat, single crystal furnace crucible with heater, edm graphite anode, metal plating, sintering mold, tube, semiconductor technology with graphite crucible, launch tube, thyratron and mercury rectifier with graphite anode, grid, etc.

Characteristics and applications: high purity graphite with high strength, high density, high purity, high chemical stability, uniform and compact structure, high temperature resistant, high conductivity, good wear resistance, self-lubrication, easy processing characteristics, widely used in metallurgical, chemical, aerospace, electronics, machinery, nuclear power and other industrial fields. Especially high quality high purity graphite, as an alternative material, has wide application space in high technology and new technology field and has wide application prospect.

The purification methods are divided into two categories: first, wet purification, including flotation, acid and alkali, and hydrofluoric acid. The second is fire purification, including chlorination roasting and high temperature method.

High purity graphite

Is widely used in high-grade refractory material and coating of metallurgy industry, military industry, fire engineering pencil lead on material stabilizer, light industry, electrical industry of carbon brush, electrode of battery industry, fertilizer industry catalyst, additive, etc. High purity graphite through deep processing, but also produce graphite, graphite sealing material and composite material, graphite products, graphite antifriction additives such as high-tech products, become the important nonmetallic mineral raw materials of various industrial sectors.


High Purity Graphite


High Purity Graphite

High Purity Graphite,High Carbon Graphite,High Purity Natural Graphite,High Purity Carbon Graphite

Fengcheng Ruixing Carbon Products Co., Ltd , http://www.lnfcrxts.com