The angle grinder may be used by many people. It is a portable power tool that uses FRP cutting and grinding and is mainly used for cutting, grinding and brushing metal and stone. As long as there are two types of angle grinders, compact angle grinders and large angle grinders, the following Xiaobian will tell you about angle grinder prices, safe operation procedures and maintenance methods.
Angle grinder price
WORX xiaoman waist angle grinder WU800 fine handle heat sink cutting machine grinding machine polishing machine Jingdong own professional hardware power tools ¥ 198 Stanley (Stanley) angle grinder 100mm850W small angle grinder (side slip switch) STGS8100 ¥199 East into S1M-FF03-100A angle grinder polishing machine angle grinder metal cutting grinding machine power tool standard ¥ 142 Bosch (BOSCH) angle grinder GWS720 (6949509200587) ¥ 318 Bosch Bosch BOSCH corner Mill TWS6700 Polishing & cutting machine Multi-function Grinding Wheel Grinding Machine Carton Standard ¥196 Note: The above prices are from internet, for reference only
Angle grinder safety operating procedures
1, with protective eyewear. 2. After turning on the switch, wait until the wheel turns stable before working. 3, long hair workers must first tie up their hair. 4, the cutting direction can not be toward people. 5. Stop for fifteen minutes after working half an hour continuously. 6, can not be hand-caught small parts diagonal grinder for processing. 7. Consciously clean the working environment after the work is completed. The specific brands and models of angle grinders are different, please be sure to check the instructions before operating.
Angle grinder maintenance method
Lead to leakage of the angle grinder is common: stator leakage, rotor leakage, brush holder leakage (angle grinder of the metal shell) and internal wire breakage. 1. Dismantle the brush and judge whether the stator and coating thickness gauge brush holder and the internal conductor have leakage. 2, disconnect the stator and brush holder connection, can determine whether the brush seat leakage. 3, independent measurement of rotor leakage. 4, the rotor and brush holder leakage can only be replaced, the stator can be re-wound or replaced. First of all, open the inspection line and the skin is not damaged. The thickness of the coating thickness meter can be detected with the multimeter. Then the rotor can be measured. It can be measured whether the rotor is leaking or the stator is leaking. The rotor leakage can only be changed. , Stator leakage is to see if the carbon powder and other debris accumulated too much and leakage, clean and then measure, or leakage is the stator winding insulation is not good, see if it is winding shell or wet, not You can only rewind. The above is the knowledge of angle grinder price, safety operation regulations and maintenance methods introduced by Xiaobian. Angle grinders are more common in modern life and are suitable for cutting, grinding and brushing metal and stone. However, water can not be used during work. Guide plates must also be used when cutting stone. When using angle grinders, everyone must maintain both hands and take protective measures.
Polyester Acoustic Screen Divider
Polyester Acoustic Screen Divider,Acoustic Divider,Polyester Divider,Decorative Acoustic Panel
Hebei RooAoo New Material Technology Co.,Ltd. , https://www.raacoustic.com