For a long time, the water pipes are aging, and it is easy to burst or leak. If they are not dealt with in time, it is very easy to bring a lot of troubles to home life. The dampness in the interior is mild and mild. Therefore, there are problems with the water pipes, and governance must be early! First, leaking water pipes 1. You can cut off the water source first, then remove the male and female nuts that connect the compression fittings, wrap the thread sealing tape on the threads, and then reattach the connectors. 2. Once the sleeve joint leaks, it may be necessary to remove the joint and reinstall a lot of water pipes. Therefore, repair engineers should be notified to repair it. 3, no matter what kind of water pipe joints leak, you can use the repair tape for temporary repair. The specific operation method is: first close the valve, cut off the water, open the tap to the appropriate position to vent most of the pressure in the water pipe, and then use a special tape to bind the leaking part, or seal it with ring gas adhesive live. Second, water burst 1. How much water is leaking after a burst pipe is generally directly related to the level of water pressure in the pipe. Whether the water is leaking or spewing out, the best thing to do at this time is to immediately close the valve of the water supply pipe and report to the local property department. 2. Wrap the damaged part of the water pipe with a special tape for repairing the water pipe. 4. If the water pipe bursts seriously, you can use a towel to wrap the broken part of the water pipe. This can prevent the water flow from spraying around, and can also introduce the water flow into the placed bucket to avoid huge waste. At the same time, it is also possible to close the valve of the domestic water main and completely retain the tap water supply in the house. 5. If the reason for the burst of the water pipe is that the pipeline is too old, the plumbers should be checked and repaired in time. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Water pipe The mechanical concealed cistern is a common bathroom fixture that stores flush water and controls flushing. It is usually installed in the wall, and there is only a button on the outside to start the flush. Its design makes the water tank no longer occupy the toilet space, thus providing more free space and beautiful appearance. Mechanical Concealed Cistern, Concealed Flushing Cistern, Toilet Flush Tank, Build In Toilet Cistern Guangdong Fabia Intelligent Technology Co., Ltd , https://www.smartfabiatoilet.com
Space-saving: The design of the mechanical hidden water tank allows the water tank to be installed inside the wall, saving valuable bathroom space, providing more free space and a beautiful appearance.
Beautiful: The design of the hidden water tank makes it no longer stand in the bathroom like the traditional surface-mounted water tank, thus improving the overall aesthetics of the bathroom.
Water saving: The mechanical hidden water tank can precisely control the water volume when flushing, avoiding excessive consumption of water resources, thereby reducing water usage and saving water bills.
Long service life: Compared with the traditional surface-mounted water tank, the mechanical hidden water tank has a longer service life and lower maintenance costs because it is more concealed and less susceptible to external factors.
More hygienic: The traditional surface-mounted water tank needs to be cleaned frequently, and the scale and sundries hidden inside the water tank are not easy to be polluted by the outside world, so it is more hygienic.