The home non-industrial humidifier with exquisite appearance is very popular. Since its launch, it has been selling well until now. At the same time, the humidification effect of household humidification is really good, the effect is very good, whether it is placed in the living room or office, it is beautiful and beautiful. It can be used as a decoration ornament. However, household non-industrial humidifiers need to pay attention to many problems after use. For example, if the non-industrial humidifier is used, the residual residual moisture should be removed in time to keep the inside of the non-industrial humidifier dry and avoid the bacteria in the humid environment. After using the non-industrial humidifier every day, there will always be no water left. At this time, we should dump it in time. The water in the night is easy to deteriorate, and bacteria are generated. After humidification, it will be volatilized into the air to pollute the environment. In addition, when cleaning non-industrial humidifiers, it is especially necessary to pay attention to the fact that cleaning is not up to standard for cleaning purposes, cleaning methods are not correct, and non-industrial humidifier equipment is also damaged. How to properly clean non-industrial humidifiers, today to introduce the method of cleaning non-industrial humidifiers.
1. Direct Evaporation Non-Industrial Humidifier Direct Evaporation Non-industrial humidifier cleaning method is relatively easy. In addition to daily use, keep the inside of the machine dry, and regularly replace the filter and evaporator. Maintenance is relatively easy.
2. Ultrasonic non-industrial humidifier Ultrasonic non-industrial humidifier is a kind of cold mist non-industrial humidifier. The humidifying method is different from the direct evaporating non-industrial humidifier. It does not need to heat the water source, and uses the vibrator to generate high frequency vibration. The water molecules are oscillated into the air to humidify the air, so the interior contains a water tank. It is especially important to clean the water tank during daily cleaning. Clean the water tank with a soft cleaning solution. Keep the water tank dry when not in use to prevent moisture damage to internal parts.
3. When cleaning the water tank, if the water tank is cleaned, if the inlet design of the water inlet is relatively large, the hand can be directly inserted into the cleaning, and the soft cleaning liquid or the special cleaning liquid for the manufacturer is used, and the cotton cloth is used for cleaning. After the cleaning is completed, the cleaning is blocked. Spout, shake the non-industrial humidifier, rinse the cleaned sewage, and repeat it several times until the tank is clean.
4. Unless the industrial humidifier water tank, the non-industrial humidifier body needs to be cleaned. If the outer casing of the fuselage is dirty, it can not be wiped with corrosive liquid such as alcohol. It should be cleaned slowly with cleaning liquid and cotton cloth. Non-industrial humidifiers are rinsed in tap water.
5. When cleaning the water tank or non-industrial humidifier casing, it must be cleaned with cotton cloth and cleaning liquid. Do not use speed, use hard objects such as steel balls, brushes, etc., which will cause damage to the machine. The humidifier does not work properly and affects the use.
Please indicate the source: http://