Yesterday, Guangdong Provincial Quality Supervision Bureau announced the regular provincial inspection and inspection of Guangdong furniture products and tempered glass in 2012. Of the 107 batches of dark and precious hardwood furniture (commonly known as " mahogany furniture "), 39 batches were unqualified, and more than 80% of the unqualified products were pure product logos. A person from the provincial quality supervision bureau pointed out that most of the unqualified furniture uses a variety of wood, but only uses the names such as "red sandalwood, black sandalwood, green sandalwood", which are all non-standard labels. In addition, 22.9% of the 166 batches of tempered glass spot-checked were unqualified, and all of them had unqualified items in the fragment state. Unqualified tempered glass is prone to produce sharp long fragments, which can easily hurt people. The Provincial Quality Supervision Bureau reminded that when purchasing tempered glass for construction, the CCC mark and certificate should be checked. In addition, spot checks on office consumables found that 11 batches of products failed. 36.4% of hardwood furniture failed The Provincial Quality Supervision Bureau randomly checked 107 batches of dark and valuable hardwood furniture produced by 104 companies, and 39 batches failed to be inspected. The rate of unqualified product discovery was 36.4%, of which only 33 batches were identified as unqualified, accounting for unqualified 84.6% of products. The rejection rate is only 5.6%. In addition, 63 batches of metal furniture products were spot-checked by 41 companies, and 2 batches of unqualified products were found, and the detection rate of unqualified products was 3.2%. Tempered glass 22.9% failed The Provincial Quality Supervision Bureau randomly checked 166 batches of tempered glass products, and 38 batches of unqualified products were found. The detection rate of unqualified products was 22.9%. In the 38 batches that failed, all of them had the problem of unqualified debris items. The unqualified tempered glass of this project is prone to produce sharp long fragments and easily hurt people. In addition, there were 2 batches of impact resistance and thermal shock resistance items that failed. In 2012, the results of provincial periodic supervision and inspection of the quality of tempered glass and hardwood furniture products of Guangdong Province can be found on the website of the Provincial Quality Supervision Bureau. Tips for choosing tempered glass The Provincial Quality Supervision Bureau reminded that when purchasing tempered glass for construction, they should check the CCC mark and certificate. According to the factory number in the CCC mark or the enterprise information in the CCC certificate, go online to check whether the product to be purchased has passed the mandatory certification in the enterprise Within the scope of the ability, whether the certification certificate is valid (the CNCA website can publicly query the information of enterprises that have passed CCC certification). Check the appearance quality of the glass. The tempered glass should be free of defects such as bursts, cracks, and missing corners, and there should be no surface scratches that are dense or affect the use of the product. The flatness is good. Tips for buying hardwood furniture The Provincial Quality Supervision Bureau recommends that consumers can request product quality inspection reports and timber tree species identification reports from enterprises. Check whether the tree species promised by the enterprise is consistent with the identification. The shelf life of dark and precious hardwood furniture shall not be less than two years. The Provincial Quality Supervision Bureau also pointed out that due to the complicated processing of dark and precious hardwood furniture, it is best to carefully check whether the craft is fine and whether it meets the requirements of consumers when buying, and try to avoid disputes afterwards.
The tool for hole processing is the earliest tool used in cutting tools, and it is also the most widely used tool. The objects of hole processing are various holes on the machine or instrument, such as the inner hole of the gear, the shaft hole on the box, and the porridge. Taper holes, etc. According to different uses and technical requirements, the tools for hole processing are divided into: drills, boring cutters, reamers, etc.
ROYI CNC Tool is a professional manufacturer of carbide boring bar. welcome to call and learn more details.
Solid Carbide Boring Cutter,Solid Carbide Boring Bar,Solid Carbide Boring Tools,Solid Carbide Boring Bars ROYI CNC TOOL TAIXING CITY CO.,LTD , https://www.royitools.com
Provincial quality supervisors pointed out that for dark and precious hardwood furniture, the surface wood is often made of some kind of precious hardwood, but internal components such as drawers are not used, but the product logo is marked as "red sandalwood" and "black sandalwood". This kind of logo is easy to make consumers mistakenly believe that 100% of the entire furniture is made of this wood. The person said that the correct sign should indicate the percentage of wood used. In addition, the instructions for use of some products in the random inspection did not express a special way of care, and were also judged as unqualified. 
