High Tensile Galvanized Steel Wire

Model NO.: s-098
Metal Wire Drawing: Hot Drawing
Status: Hard State
Thickness: Metal Thick Wire
Certification: SGS
Wire Diameter: 1-5mm
Tensile Strength: 450-1650MPa
Product Name: Galfan Wire
Trademark: juyun
Transport Package: Coil Packing
Specification: 1-5mm
Origin: China
HS Code: 7217200000
Model NO.: s-098
Metal Wire Drawing: Hot Drawing
Status: Hard State
Thickness: Metal Thick Wire
Certification: SGS
Wire Diameter: 1-5mm
Tensile Strength: 450-1650MPa
Product Name: Galfan Wire
Trademark: juyun
Transport Package: Coil Packing
Specification: 1-5mm
Origin: China
HS Code: 7217200000
Galfan Steel Wire 
1. Material:  Q195,Q235,45#,60#,65#,70#,72B,80#,82B,65Mn
2. Surface Coating: Galvanized, galfan(5% Aluminuim, 95% Zinc coating)
3. Characteristic: High tensile strength,small tolerance Good galvanized, good corrosion prevention Being used for ACSR
4. Packing type:Spool or Coil 
5. Application: Being used for ACSR, fence, agricultural use and so on.
Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:450~1340Mpa
Nominal Diameter Tensile Strength Stress at 1% Elongation Twist Elongation Standard
mm Mpa Mpa Times/360°C Lo=250mm As per GB,EN,IEC,JIS,ASTM standard,as well as customer's request
1.24-2.25 ≥1340 ≥1170 ≥18 ≥3%
2.25-2.75 ≥1310 ≥1140 ≥16 ≥3%
2.75-3.00 ≥1310 ≥1140 ≥16 ≥3.5%
3.00-3.50 ≥1290 ≥1100 ≥14 ≥3.5%
3.50-4.25 ≥1290 ≥1100 ≥12 ≥4%
4.25-4.75 ≥1290 ≥1100 ≥12 ≥4%
4.75-5.50 ≥1290 ≥1100 ≥12 ≥4%
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
 
  Galfan Steel Wire 
1. Material:  Q195,Q235,45#,60#,65#,70#,72B,80#,82B,65Mn
2. Surface Coating: Galvanized, galfan(5% Aluminuim, 95% Zinc coating)
3. Characteristic: High tensile strength,small tolerance Good galvanized, good corrosion prevention Being used for ACSR
4. Packing type:Spool or Coil 
5. Application: Being used for ACSR, fence, agricultural use and so on.
Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:450~1340Mpa
Nominal Diameter Tensile Strength Stress at 1% Elongation Twist Elongation Standard
mm Mpa Mpa Times/360°C Lo=250mm As per GB,EN,IEC,JIS,ASTM standard,as well as customer's request
1.24-2.25 ≥1340 ≥1170 ≥18 ≥3%
2.25-2.75 ≥1310 ≥1140 ≥16 ≥3%
2.75-3.00 ≥1310 ≥1140 ≥16 ≥3.5%
3.00-3.50 ≥1290 ≥1100 ≥14 ≥3.5%
3.50-4.25 ≥1290 ≥1100 ≥12 ≥4%
4.25-4.75 ≥1290 ≥1100 ≥12 ≥4%
4.75-5.50 ≥1290 ≥1100 ≥12 ≥4%
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
High Tensile Galvanized Steel Wire
 
 

Ceramic End Mills

Straight Reamers are used to drill a hole in material with a pilot hole. In order to improve machining efficiency, we usually use the process strategy with a solid carbide drill and straight reamer reduces the processing time and produces a straight hole with tight tolerances and an excellent surface finish.

Advantage:

Unique guidepad geometry allows for excellent roundness and straightness, even in an interrupted cut condition.

Surface roughness is reduced obviously.

Reduced the machining time while maintaining a reliable process.

Features

With 4, 6 or 8 flute

Multi-diameter tool allowing for excellent hole size and concentricity between diameters.

Flexible in order quantity:

Samples can be provided before mass production, and MOQ can be discussed accordingly.


PRODUCT DETAIL:

Carbide End Mill ReamersCarbide End Mill Reamers3Carbide End Mill Reamers4Carbide End Mill Reamers2Carbide End Mill Reamers6Carbide End Mill Reamers5Carbide End Mill Reamers9Carbide End Mill Reamers8Carbide End Mill Reamers7


PRODUCTING PROGRESS:

4product detail-fanyi

PAYMENT AND DELIVERY:

banggong huang jing

PRODUCT EQUIPMENT :

+product equipment

ABOUT US :

We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,


We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

banggong huang jing

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

great service


Carbide Reamer,Solid Carbide Reamers,Tapered Reamer,Adjustable Reamer

OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.net