Safety Valve Foot Valve Globe Valve and Other Valves
Globe Valve is one of the most widely used valves, it is durable, easy to fabricate and maintance. Ningbo RMI Plastic Co.,Ltd offer PVC globe valve, CPVC globe valve, PVDF globe valve, PP globe valve, PPH globe valve, PTFE lined globe valve, with flange end and screw connection, design and fabricate as per standard DIN, ANS, JIS. Plastic globe valve is suitable for corrossive medium application, widely used in Chemical factory.
Foot Valve also named bottom valve, the function of the valve is to prevent medium backflow, mainly used to protect pumps and other equipments. RMI PLAST offer different models of plastic foot valve with materials of PVC, CPVC, PVDF, PP, PPH, PTFE lined, with flange end and socket connection as per ANSI, JIS, DIN standards.
Sampling Valve is used to obtain medium sample from pipeline or equipment, RMI PLAST brand PVC sampling valve is special designed with small size, light weight, easy handle. 1/4" size male thread end and 1/2" size coupling end is easy to install and replace.
Globe Valve,Foot Valve,Sampling Valve,PVC Globe Valve Ningbo RMI Plastic Co.,Ltd , https://www.rmiplast.com
We also have many misunderstandings to avoid. Today, the editor will take a look at the most common mistakes in choosing lamps and lanterns, so that everyone can avoid making mistakes!
1 Too many spotlights There are many friends who do not want to install the main light. Pay attention to it. Although the spotlights can be used for lighting, the spotlights should not be installed too much. Too many spotlights not only waste electricity, but also uncomfortably hot when sitting down.
As far as safety hazards are concerned, too many spotlights produce a lot of heat, and home furnishing products are exposed to high temperatures for a long time, which is more likely to cause fires.
Therefore, the layout of the lamps in the early stage should be seriously considered to reduce unnecessary spotlights. 
2 When there is no lighting in the aisle , I thought that the aisle was just a short distance. There is no need to add a lamp. After I checked in, I found it was inconvenient to pass through the corridor at night.
The aisle is the transition between the living room and each room. Generally, the lighting is poor. Properly installing lamps on the aisle not only facilitates daily life, but also makes the aisle appear spacious. Therefore, the aisle lights should be left in the early stage.
If the chandelier can no longer be installed in the aisle, consider placing a floor lamp in the corner of the corridor, and try to remove the decoration and debris of the corridor to make the corridor more spacious. 
3 Color is chaotic Now there are many different colors of lighting on the market, but the editor reminds everyone that home is a place to rest, and comfort is the first choice. If the mixed light source is irradiated in the room, the home will become a KTV and feel uncomfortable.
Therefore, when choosing lights, it is recommended that you still choose a light source with a uniform tone. Most people like a more warm atmosphere and can choose warm yellow lights. Of course, other colors can also be used to embellish them. There is no dual control switch installed in the 4 bedroom. Because there is no consideration before the decoration, if only one switch is kept in the bedroom, it is difficult to find the switch when it is dark at night. Especially if there are children and the elderly at home, it will be very inconvenient.
The dual control switch can be installed in the early stage of wiring arrangement. If you have installed a switch, you can install a regulator in the lamp later to control the light switch through the remote control. In addition, the easiest way is to put a small table lamp or night light on the bed. Tips: In the U factory workshop package, the master bedroom comes standard with dual control switches! 5 Abuse of energy-saving lamps Energy-saving lamps are widely used in home improvement, and many people also choose them as the main light source. However, when the energy-saving lamp lights down, it will give people a cold feeling, which will affect the warm atmosphere of the entire home.
Therefore, under normal circumstances, the editor recommends that you use energy-saving lamps and incandescent lamps together to use, so that the color of the lights will be warmer.
6 Direct light now There are some lamps with bare bulbs on the market. These lamps are not very beneficial to the human eye, especially the eyes of small children. If the light is relatively strong, the strong light will enter the eye directly, which will cause adverse effects.
You can use the "secondary lighting" method, such as hitting the light to the ceiling and reflecting it down, which will not damage your eyes and add a romantic atmosphere.
7 The light strips are criss-crossed. The general family building space is relatively small, and the storey height is generally relatively low. The height required for the "light strip" has certain requirements, so from the perspective of height and space size, the "light strip" is not suitable. Used in home.
In addition, if there are too many "light strips", and the space division is not considered, it will give people a feeling of messy space and unclear levels. As for the "light strip" power consumption and other reasons, it is the reason why the home space is not suitable for "light strip".
So if the area of ​​the home is not large or the floor height is low, try not to make a light strip, so as not to appear depressed.
8 The style is chaotic Now there are more and more styles of luminaires, and the styles are getting more and more beautiful. Many people are in a space with Nordic, American, and modern style lamps, but too many styles are mixed together, but they have become a failure . The reason is that it is not in harmony with the overall decoration style.
Generally speaking, the lights in the same room, such as the living room, bedroom or study, should be unified in style, materials and colors. In a space, only two styles of lights can be mixed at the same time.
At the same time, the style of home lighting should also pay attention to the overall tone coordination with the shape and color of all the space occupied objects (furniture, electrical appliances, etc.). 
The decoration contains details of various sizes, and so much attention is paid to the selection of lamps alone. Why not find a simpler way? For example, choose U home workshop ! From materials, design to construction,
Don't worry about the whole decoration process, it is a reliable decoration company that makes people worry and effortless!
There are 8 mistakes in choosing the most common lamps. Don't make the same mistake!
Before, I have talked with everyone about how to choose indoor lights. God said that there must be light. Let’s talk about the combination of indoor lights in addition to these basic knowledge.