Summer floor decoration maintenance needs to be protected from moisture and rain

In recent years, the home decoration industry has shown a weak, peak season, and the summer is no longer fixed as a low season. With the gradual increase of temperature, the daytime is prolonged and the ventilation conditions are good. More and more people tend to decorate in the summer, and the home decoration market is gradually ushered in a small climax. Professionals believe that the summer decoration and maintenance need to pay attention to more problems than the spring and autumn, especially to "moisture and shelter from the rain."

Some owners' homes may have arching, bubbling, and mildew due to improper decoration and maintenance. How to maintain the floor? How to prevent moisture and mold in summer? Let’s take a look at what the floor expert said.

The material of the floor (including the reinforced floor) is wood. The important one of the natural properties of the wood is: swelling and shrinking, swelling, deformation, crevices on the edge, creping, bubbles, peeling, floor Uneven phenomena such as stratification and degumming. After the environment is suitable, symptoms such as deformation and blistering will be alleviated.

Moisture prevention measures include: 1) raining the window; 2) checking the water pipe; 3) installing the ground over wet; 4) cement floor, ground floor, geothermal floor, need to add good moisture-proof film; 5) keel or fur floor installation Method, should avoid keel and fur floor too wet; 6) animal urine, accidental watering, timely removal; 7) carpet covering the floor, etc., should not be too large (less than 1 square meter), the cover needs to be breathable.

Damp floor treatment: 1) Floors that have been heavily damp or soaked for more than 30 minutes. There will be deformation, bulging, blistering, loss of gloss and so on. Such a floor is basically abolished, it should be replaced, and the moisture under the floor should be removed and dried; 2) For lightly soaked and damp floors (observed for obvious deformation), it can be dried, ventilated, and dismantled if necessary. Open the floor and observe whether there is any water on the ground. If necessary, remove and dry it and reinstall it.

In addition, the mild damp floor can be placed in a cool, ventilated place to dry. Be careful not to blow hair, sun exposure, or drying, which will accelerate the serious deformation of the floor and damage the surface. Deformation, bulging, blistering, etc. of the damp floor. After the environment recovers well, the degree of defects will be reduced, the floor should not be treated with essential oils, waxing, etc., solid wood flooring is best not to be waxed (except for single solid wood), essential oil care, to be carried out after the floor is restored (generally 1 - Essential oil care after 2 months).