Home>Bearing knowledge>Repair of water pump bearings |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Pump bearing repair method
Source: China Bearing Network Time: 2014-06-28
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
(1) The pump that is newly put into use; usually it needs to replace the smooth grease (oil) after 100 hours of operation; it will be replaced once every 500 hours in the future.
(2) Select smooth bearing with smooth grease; after 1500 hours of operation; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat; the amount of fuel is usually grasped 1/2 to 2/3 of the bearing chamber volume is appropriate.
(3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
(4) Containers containing smooth oil or smooth grease should be clean; usually should be sealed; there should be no dust, iron filings, etc.; avoid damage to bearings (5) Motor bearings usually use sodium-based smooth grease; It is characterized by high temperature (125 ° C); but it is easy to dissolve in water; so it can not be used for the smoothness of water pump bearings.
Recommend to friends comments close window
Bearing related knowledge |
Analysis of Classification Skills of Rolling Bearing Layout Types: Bearing Treatment Schemes for Wind Turbines Timing of Bearings Viewing the Criterion of Rolling Bearings Influence of Oscillation Wear and Temperature on IKO Bearings and Countermeasures
|
This article links to http://
Please indicate the bearing network http://
Previous:Introduction to the main bearing of cement mill Next:The reason for the failure of imported bearings
Reel Hose can keep shape, it has light weight,high-pressure resistance and small flow-resistance.
applications in Fire-fighting; Shipping; petroleum;agriculture;Mining,garden,Color available:white;red;yellow; or as per customer`s instruction.standard:GB6246,EN14540,UNI9487; or as per customer`s instruction. standard length:10M upto 40M
PRESSURE REQUIRED:
I.D.
(inch/mm)
|
Working pressure
(Bar / Mpa / Psi)
|
Burst pressure
(Bar / Mpa / Psi)
|
3/4``
|
19
|
13-30
|
1.3-3.0
|
190-435
|
39-90
|
3.9-9.0
|
570-1305
|
1``
|
25
|
13-30
|
1.3-3.0
|
190-435
|
39-90
|
3.9-9.0
|
570-1305
|
1-1/4``
|
32
|
13-30
|
1.3-3.0
|
190-435
|
39-90
|
3.9-9.0
|
570-1305
|
Reel Hose
Canvas Fire Hose,Canvas Hose,Pu Canvas Fire Hose,Pvc Canvas Fire Hose
NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com