Table Plasma Cutting Machine features: Table Plasma Cutting Machine Plasma Cutter For Stainless Steel,Cnc Steel Cutting,Ss Cutting Machine,Ss Plate Cutting Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com
Tian Weiyong, director of the Environmental Supervision Bureau of the Ministry of Environmental Protection, announced that the intensive inspection team has inspected more than 32,000 enterprises since the Beijing-Tianjin-Hebei and surrounding areas have been inspected for more than 30,000 companies, of which more than 20,000 companies have environmental violations. The proportion reached more than 64%, especially the problem of â€œscattering and pollutionâ€ enterprises, and the number of illegal problems such as imperfect pollution control facilities. "At the end of June, the number of 'scattered pollution' enterprises reported by local governments reached 176,000. At the end of September, enterprises that could not be upgraded and rebuilt were all required to be closed down. If such problems are found in the winter, not only must enterprises be strictly handled, We must also blame the local government. Through intensive supervision, we hope to solve the ills in air pollution control."
Tian Weiyong said that the Ministry of Environmental Protection implements a very strict accounting system, taking the â€œdisintegrationâ€ enterprise as an example. For enterprises that need to be shut down, they must achieve â€œtwo breaks and three clearsâ€, that is, water cut-off, power cut-off, clear materials, and equipment. Clear the venue. Previously, the statement that the coverage of intensive supervision was too large and â€œenvironmental supervision has affected the local economyâ€ has aroused widespread concern. In response to this, Tian Weiyong responded that taking a high-pressure situation against environmentally illegal enterprises will not affect the normal development of the social economy. "There are no formalities, no governance facilities, and no scattered pollution." No enterprises should not exist anywhere.
The new Minister of the Ministry of Environmental Protection: At the same time as the most stringent "environmental protection law" in history, it is necessary to make the "five-step method" of the inspection storm effective. 2017 is the third year of the Ministry of Environmental Protection to carry out the "Environmental Protection Law" implementation year. However, Tian Weiyong said that in some areas, the investigation and punishment of environmental violations is still insufficient. The number of cases investigated in the Beijing-Tianjin-Hebei region is lower than the national average. More than 50% of the districts and counties in eight provinces, autonomous regions and municipalities such as Hebei and Jilin have not applied the four supporting measures of the Environmental Protection Law.
"If the weapons in the history of the most stringent 'environmental law' have not been used, how can it be regarded as the 'environmental protection law' landing?" Tian Weiyong said that in the past, environmental law enforcement only had a means of fine. Now, four supporting methods have been given The environmental protection department has more mandatory powers. Tian Weiyong said that it will continue to intensify efforts to promote grassroots law enforcement to achieve practical results.
At the same time as the "Environmental Protection Law" was in full swing, the inspection storm was also followed in an orderly manner following the "five-step method" of the new Minister of Environmental Protection Li Ganjie. As the saying goes, "The new official took up three fires." On June 27, 2017, the new Minister of Environmental Protection Li Ganjie took office. The first public event after Li Ganjie took office was the fourth batch of trainers who received intensive supervision of air pollution prevention and control in Beijing, Tianjin and Hebei. At the meeting, Li Ganjie proposed a new management idea for the â€œfive-step methodâ€ environmental supervision.
The so-called "five-step method" is a set of "combination punches" for supervision, assignment, inspection, interviews, and special inspections. in particular:
The first step: supervision, that is, the inspectors went to the scene to find the problem.
The second step: the assignment, involving important issues concerning the improvement of environmental quality, the Ministry of Environmental Protection will send a document to the local government officially, that is, â€œrecord the account and hang up the billâ€.
The third step: inspections, the various departments of the Ministry of Environmental Protection sent people to inspect the "scheduled orders" of the local governments, is the progress?
The fourth step: interview, if the inspection shows that the progress of the governance is slow and the rectification is weak, the Ministry of Environmental Protection will talk about the relevant leaders of the local government. After the interview, the Ministry of Environmental Protection will send people to "look back."
The fifth step: special inspectors, for the places that are still "indifferent", will also launch the "mobile" and "point-and-point" central special inspectors, and blame people to ensure that the problem is fully resolved.
Environmental supervision will not stop! Focus on the end of the year! Quickly see when to start checking your plant
Knocking on the blackboard: What are the key points of environmental supervision every month in the second half of the year?
The focus of the inspection from July to August: to inspect whether the local authorities have completed the discharge permit issuing work before the end of June; the installation, networking and operation of the "high-rise source" automatic monitoring equipment; and the discharge of industrial pollution sources.
Key points for monitoring in September: Before the end of September, special emission limits were imposed on sulphur dioxide, nitrogen oxides and particulate matter atmospheric pollutants emitted by all coal-fired boilers in urban administrative areas. Investigate excessive discharge behavior according to law. Supervise whether the completion of the peak production plan and the list development work, the enterprises that do not implement the peak production in key industries, shall approve the maximum allowable production load according to the task, and approve or record according to the requirements of the Work Plan.
After October, the focus of the inspection:
(1) The completion of the task of â€œsmall scattered pollutionâ€ enterprises before the end of October;
(2) The completion of the phase-out work of coal-fired boilers of 10 tons and below, as well as the large stoves and operating small coal stoves before the end of October;
(3) The implementation of special emission limits for sulfur dioxide, nitrogen oxides and particulate matter atmospheric pollutants emitted by coal-fired boilers;
(4) The discharge of sewage discharge permits in steel, cement and other industries;
(5) The discharge of industrial pollution sources meets the standards.
The timetable for environmental supervision in various provinces and cities?
Inspection time: The fourth batch of inspections began on July 14, and each city will inspect 25 rounds this year.
Scope of supervision: â€œ2+26â€ cities are specifically Beijing, Tianjin, Shijiazhuang, Tangshan, Baoding, Langfang, Zhangzhou, Hengshui, Handan, Xingtai, Shanxi Province, Taiyuan, Yangquan, Changzhi, Jincheng, Jinan, Shandong Province , Zibo, Liaocheng, Dezhou, Binzhou, Jining, Heze City, Henan Province, Zhengzhou, Xinxiang, Hebi, Anyang, Jiaozuo, Fuyang, Kaifeng City.
Supervision content: special supervision of air pollution prevention and control.
Inspection time: June 2017-2018, for a period of 9 months.
Supervision scope: Guangzhou, Shenzhen, Foshan, Dongguan, Zhongshan, Jiangmen, Zhaoqing, Qingyuan, Yunfu 9 cities.
Supervision: The province mobilized about 2,000 environmental law enforcement personnel to carry out special inspections on atmospheric and water pollution prevention for 9 months and 18 rounds in 9 cities.
The contents of the supervision: including the implementation of the province's "gas ten", "water ten", the progress of atmospheric strengthening measures, "disorganized pollution", "ten small" enterprises, drinking water source protection area illegal construction projects, the focus The handling of petition cases, the pollution remediation of key industries, the remediation of key river basins, the comprehensive environmental remediation of key areas, and other supervision tasks assigned.
Inspection time: June 28, 2017 - March 31, 2018, for a period of 9 months.
Scope of supervision: 7 transmission channel cities, namely: Jinan, Zibo, Jining, Dezhou, Liaocheng, Binzhou, Heze City.
The contents of the inspection: First, the operation of environmental protection facilities of key industries and the discharge of standards. The second is the investigation and suppression of â€œsmall scattered pollutionâ€ enterprises.
Inspection time: July 7th - August 5th Supervision scope: Xuzhou, Nantong and Yangzhou City supervision contents: Focus on understanding the implementation of the major decision-making arrangements for environmental protection at the municipal party committee and the government, and the promotion of key environmental protection tasks, The improvement of regional environmental quality, the promotion of the reform of the ecological civilization system, the highlighting of environmental issues and the handling of the situation, and the implementation of environmental protection responsibilities, etc., focusing on the supervision of local party committees and governments and their relevant departments on environmental inaction and chaos, focusing on supervising the central government Environmental protection inspectors feedback problems rectification and progress of the â€œ263â€ special action.
Inspection time: May 2017-2018 (November 2017-2018 February is the key inspection time) for a period of 10 months.
Scope of supervision: Focus on the 8 cities of Chengdu, Deyang, Mianyang, Suining, Leshan, Ya'an, Meishan and Ziyang.
Supervision content: special supervision of air pollution prevention and control.
1. Table Plasma Cutting Machine with welded lathe bed of thick profiled steel, more solid and stable.
2. Perfect lathe table design, 8mm steel plates fixed on lathe table covered by cast sheath.
3. Advanced material inclined discharging design.
4. Table plasma Cutting Machine support FASTCAM nesting software such as the standard G code path generated file can also be read by software conversion software such as AUTOCAD generated DXF formats. U disk exchange control system processing files, easy to operate.
5. Table plasma cutting machine support CAMDUCT software professional for air duct industry.
Table Plasma Cutting Machine features:
Table Plasma Cutting Machine
Plasma Cutter For Stainless Steel,Cnc Steel Cutting,Ss Cutting Machine,Ss Plate Cutting
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com