Eight items for foundation construction of small concrete mixing plant

Eight items for foundation construction of small concrete mixing plant

After the site of the small concrete mixing plant is determined, the work center is the foundation construction of the small-scale concrete mixing plant, which requires the technicians and customers of the small-scale mixing plant to cooperate with the customer in accordance with the precise construction of the concrete mixing plant site design drawings.

Eight items need to pay attention to the foundation construction of small concrete mixing plant

1. The level of the foundation of the small concrete mixing plant must be measured with a level meter and a super-sweeper, and it is not responsible for the losses caused by the inconvenience of the foundation.

2. Prepare embedded iron according to the drawing requirements of the small mixing plant. The size of the embedded iron shall not be arbitrarily changed. If any changes are necessary, the site technical instructor must be informed and a written certificate must be issued.

3. It is required that the reinforcement mesh and steel anchoring hooks in the foundation of the concrete mixing plant shall not be lower than the dimensions required in the drawings; the required depth and width of excavation shall not be lower than the dimensions required in the drawings;

4. It is not allowed to arbitrarily change the dimensions indicated on the drawings. If there is any change, the site technical instructor must be informed and a written certificate must be issued.

5, according to the technical requirements of small concrete mixing plant line, find a good reference point, the size of the error between the two base shall not exceed 50mm, with the center of lime sprinkled out of the foundation and the excavation of the size range;

6, after the basic excavation qualified pouring concrete, the need for secondary pouring must be second pouring, the reference may be C20-C30;

7. When excavating the foundation, use steel bars or wooden beams to reserve the centerline position of the foundation. The marking requirements are clear. The positions of the two embedded iron centerlines on the same foundation should be on the same line, and the deviation should not exceed 20mm;

8. When the pre-embedded iron is placed before the completion of pouring, it must maintain the ±0.00 level with the ground level and the level and parallel with the adjacent embedded iron, and must not be twisted or off-center.

In addition, how much money to invest in a concrete mixing plant must include the construction of the site. Experts in the planning and construction of the concrete mixing plant and engineering mixing plant should contact Jinfan Machinery!

Shutter Sound Barrier are acoustic fences designed to act as a sound barrier and screen vehicle noise from roads,highways, railways, residential areas, construction sites. 

Noise barriers help in absorbing the noise generating from vehicles on a heavy vehicular traffic area. Thus noise barriers have proven to be effective in absorbing noise and providing an excellent solution to subsidize noise for highway, residential areas near the busy roads, and also for schools, hospitals.
Materials: aluminum sheet, galvanized steel sheet .etc
Finishing:high-pressure electrostatic spray coating
Standard Height:2,000mm, 2,500mm, 3,000mm and space between poles 1,000mm, 2,000mm and 2,500mm. it is available upon customer request.
Features:
1. Absorptive and insulation type.
2. Minimum noise leakage due to special snap lock design.
3. High intensity and stability: special-made steel structure and aluminum material.
4. Safety: PC sun panel or double layers with pastern apply on the transparent insulation part to avoid hurting vehicle and others on case of incident.
5. Beautiful appearance, delicate workmanship, easy installation, low cost and long service life.
6. It has wide applications on express way, subway and industry noise control.
7. The light transmission of the sheet is quite good.
8. The weather resistant treatment of anti UV on the surface of the sheet prevents the resin from turning yellow by causing Ultraviolet ray.
9. The UV agent has chemical bond to change ultraviolet ray into visible light ,which has a stable effect on the photsynthesis of plants.
10. Temperature property: in the temperature from -40C to 120C, the product will not deform.
11. It is light in weight, easy to handle and drill,convenient for construction and procession .When cutting for installation ,it is not easy to be broken.
Applications:
1. Highway noise walls
2. Railway noise walls
3. Airport noise barriers
4. Security fence
5. Obscuration screens
6. Bridge and roof mounted noise barriers
7. Industrial noise control panels
8.Construction materials
9.School enclosures

Shutter Sound Barrier

Louver Upright Sound Barrier,Noise Barrier,Noise Barriers For Small Equipment

Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com