Commonly used methods for disassembling several types of rolling bearings

Home>Bearing knowledge>Removal methods for several commonly used rolling bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Commonly used methods for disassembling several types of rolling bearings

Source: China Bearing Network Time: 2014-09-12
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Commonly used disassembling methods for rolling bearings are: tapping method, pull-out method, pushing method, and hot-breaking method.
First, the tapping force is usually added to the inner ring of the bearing; the striking force should not be added to the rolling body and the supporting frame of the bearing; this method is simple and easy; but the bearing is simply damaged; when the bearing is at the end of the shaft; Use a copper rod or other soft metal material that is smaller than the inner diameter of the bearing to abut the shaft end; the lower part of the bearing is padded; the hammer is slammed by hand; it can be removed. This method should be used to pay attention to the orientation of the spacer; It should be correct.
Second, the pull-out method selects the special puller; when disassembling; just rotate the handle; the bearing will be pulled out gradually. When the outer ring of the bearing is disassembled; the angle of the two legs of the puller should be opened outward, and the inner ring of the bearing is opened. When the puller two feet should be inward; stuck on the end face of the bearing inner ring.
Matters needing attention:
1. Hook the puller of the puller to the inner ring of the bearing; not the hook on the outer ring; prevent the bearing from loosening or damaging,
2. When using the puller; align the screw to the middle hole of the shaft; do not tilt. Also pay attention to the force of the hook and the bearing; do not damage the hook and the bearing.
3, pay attention to prevent the hook from slipping,
4, the angle of the two feet of the puller is less than 90 °.
Third, the push method uses a press to push the bearing; the operation is stable and reliable; does not damage the machine and the bearing. The press has manual pushing; the mechanical or hydraulic press pushes.
Matters needing attention: the focus of the press should be in the middle of the shaft;
4. The hot-disassembling method is used to disassemble the tightly-cooperative bearing. Firstly, the oil heated to about 100 °C is poured into the bearing to be disassembled; after the bearing ring is heated, the bearing can be pulled out with a puller. .
Matters needing attention:
1. First and foremost; the puller should be mounted on the bearing to be removed; and a certain pulling force should be applied.
2. Before heating; use an asbestos rope or a thin iron plate to wrap the shaft; prevent the shaft from being inflated by heat; otherwise it will be difficult to disassemble; when the bearing is removed from the bearing housing hole; only the bearing housing hole can be heated; Can't heat the bearing,
3. When pouring oil; the oil pot should be smoothly poured on the bearing ring or the rolling body; and an oil basin should be placed under it; collect the hot oil flowing down; prevent the dregs and burns,
Recommend to friends comments close window

Bearing related knowledge
"Control and elimination of SKF bearing corrosion" skills
Introduction to SKF double row deep groove ball bearings
How is the ferrule of NSK one-way bearing machined?
INA bearing operation view and fault treatment Chinese rolling mill oil film bearing skills


This article links to http://
Please indicate the bearing network http://

Previous:The precision after the fine bearing device Next:How to protect the smooth and dry crusher

Touch Up Paint Pens are specially designed for wood stain.

Hollow Point Steel Tip Markers and Mop Markers are available in 1mm and 4mm.

Ink Refills and Paint Refills Paint are excellent for various kinds of marker pens.


                                                                        Hollow Point Steel Tip Marker

Other Marker Pen

Steel Tip Marker Pen,Touch Up Pen,Alcohol Based Marker Pen,Mop Markers,Touch Up Paint Pen,Steel Tip Marker

Ding Wei Paint Technology. CO,ltd , https://www.toprankchemical.com